Installing A RoushCharger On A 2004 F-150 - Pulling Power
|
One of the few specialty tools you'll need for the job will be some sort of fan wrench. In a nutshell, the fan is threaded with a left-hand thread-fan clutch instead of bolted on. You'll need to secure the water pump pulley with the tool and then loosen the fan clutch with the other half of the tool. Some people get away with a large set of Channellock pliers on the water pump pulley retaining bolts, too. Be careful to not let the fan fall into the radiator. Once the fan is loose, remove the radiator shroud and fan together. View Related Article
|
|