Installing A RoushCharger On A 2004 F-150 - Pulling Power
|
The factory throttle body, with drive-by wire, will be reused on the RoushCharger installation (both intercooled and non-intercooled kits). The throttle body is mounted in a vertical plane on the OE intake. The new RoushCharger kit will have it mounted horizontally. Disconnect the TP (throttle position) sensor and ETC (electronic throttle control) connectors before removing the throttle body from the OE intake and then quickly transfer the O-ring gasket to the new Roush Throttle Spacer to prevent O-ring growth. View Related Article
|
|