Purchasing a new Mustang is always an exhilarating thrill, but getting it to stand out amongst the array of other Ponies on the road is somewhat of a challenge. Big Worm Graphix has what any Mustang enthusiast needs when it comes to appearance and that sleek look you're looking for. Recently, we got a chance to install its complete hood and tail lamp tint kit on a '12 Mustang.
Big Worm Graphix sells a complete line of lens protections and tint for all '99-'13 Mustangs (including Shelby and Cobra models.) The kit is available in optic blue, clear, yellow, and an assortment of other colors to fit your needs. Included are: two fitted pieces for the headlights, a pair of front and rear side markers, two rear taillights, and a third brake light. You can find the complete kit here at www.bigwormgraphix.net. Follow along as we show you the install process of its kit onto this '12 Pony.
We began by cleaning the surface of the factory taillights to wipe off any elements that may pose a sealant problem when we begin to install the product.
Here we matched up the tint...
Here we matched up the tint products to its complementing place. Check to make sure there are no small tears or any inhibitors to the product before install.
In order to maneuver the tint...
In order to maneuver the tint and fit it into place, use a spray bottle with distilled water to help adjust the tint to where it needs to be placed.
The distilled water does not...
The distilled water does not effect the adhesion to the lenses.
Here we installed the rear...
Here we installed the rear side markers tints. Follow the same instructions as previously stated.
Once the tint is installed,...
Once the tint is installed, use the supplied squeegee to eliminate...
...any air bubbles or wrinkles...
...any air bubbles or wrinkles that may have occurred when installing.
Here is the finished product after the install. If you ask us, this product really gave the '12 Pony a whole new look.