347 Stroker Test - Fresh-Squeezed Stroker

Contrary to popular belief, touching a match to the stream of nitrous oxide will result in very little drama. In point of fact, the match will simply go out. Noticeably absent will be the door-blowing explosions and eyebrow-singing fireballs that send the aforementioned street racer's ride to a fiery grave.

It should, however, be noted that the oxygen contained within the nitrous oxide compound is extremely flammable--it is just that the compound itself is not. Only after the oxygen molecules have been released from the compound will they be allowed to burn. Fortunately for enthusiasts, it requires a great deal of heat (to the tune of 572 degrees) to liberate the oxygen molecules. In the internal combustion engine, this tremendous (oxygen-liberating) temperature is supplied by the combustion process.

Technically speaking, however, nitrous oxide is not a fuel, but rather an oxidizing agent. Once released, the free oxygen molecules support (or enhance) the combustion process, which requires the burning of some other fuel--in this case gasoline.

As if the release of the power-producing oxygen molecules isn't enough to win you over, additional power gains are realized by the reduction in inlet charge temperature. For automotive use, nitrous is stored (under pressure) as a liquid, and when injected, the nitrous is converted into a gas (a process called boiling). The liquid-to-gas conversion absorbs a great deal of heat from the surrounding area (the inlet air). Though we normally associate a boiling point with heat (converting liquid water to steam at 212 degrees), the boiling point of nitrous oxide is a chilly -129 degrees.

In addition to the heat absorbed during the boiling process, introducing a compound at -129 degrees has an additional positive (chilling) effect on the inlet charge temperature. Cooler inlet air is rich in oxygen molecules. Basically speaking, the cooler the air, the greater the number of oxygen molecules present. Nitrous oxide is about as cold a substance as you can ever deliver to your motor. Not surprisingly, the combination of extra oxygen molecules and additional cooling can produce some pretty impressive power gains.

One of the great things is that the additional power supplied by nitrous injection is nearly independent of the power output of the original motor. You don't need a dedicated nitrous motor, or even anything more exotic than a stock motor, to enjoy the benefits of nitrous.

We mentioned that the nitrous oxide is responsible for cooling the inlet charge, something that both improves power output and helps suppress harmful detonation. The separation of the nitrogen and oxygen molecules (during combustion) into individual components also helps to minimize detonation. This built-in detonation control allows impressive power gains without fear of damage to the motor, even a stock motor with cast pistons. Of course the power gains and life expectancy of the motor are directly related to the tune, as proper air/fuel mixture and (especially) ignition timing are critical on a powerful nitrous motor. Applied and tuned properly (as per the supplied instructions), a modern nitrous system can provide safe, effective, reliable power gains.

While nitrous oxide will definitely wake up a stock 5.0L Ford, there are ways to further improve the power of a nitrous motor. With that many additional oxygen molecules finding their way into the combustion chamber, they naturally have to find a way out. This is where things like cylinder heads, cam timing, and even the exhaust system can play a part. Remember, the extra power offered by nitrous is on top of the power offered by the normally aspirated combination--the more power before the nitrous, the more power after the nitrous.