search musclemustangfastfords.com

Supercharged Two Valve Motor Dyno Test

 
Supercharged Two Valve Motor Dyno Test
Supercharged Two Valve Motor Dyno Test
After figuring out the belt routing and a couple of pulley changes, we were eventually rewarded with peak numbers of 719 hp and 697 lb-ft of torque. This power level was taxing the six-rib setup, the blower itself, and possibly the inlet system. For higher power levels, stepping up to the 2.6l blower, the Mammoth intake and an eight-rib belt system should be considered mandatory. View Related Article
Supercharged Two Valve Motor Oil Check Supercharged Two Valve Motor Cobra Rods And Pistons Supercharged Two Valve Motor Ported Pi Heads Supercharged Two Valve Motor Valvespring Upgrade Xe274h Cams Supercharged Two Valve Motor Longtube Headers Supercharged Two Valve Motor Stock Pi Intake Supercharged Two Valve Motor Kenne Bell Supercharger Kit
Supercharged Two Valve Motor Kenne Bell Twin Screw Supercharger Supercharged Two Valve Motor Air To Water Intercooler Supercharged Two Valve Motor Kenne Bell Boost A Pump Supercharged Two Valve Motor Supercharger Intake Intercooler Supercharged Two Valve Motor Blower Pulley Supercharged Two Valve Motor Mammoth Intake Upgrade Supercharged Two Valve Motor Accufab Throttle Body
Supercharged Two Valve Motor Air Inlet Supercharged Two Valve Motor PI Intake Removal Supercharged Two Valve Motor Kenne Bell Supercharger Supercharged Two Valve Motor Holley 50 Pound Injector Supercharged Two Valve Motor Water Pumping Supercharged Two Valve Motor Blower Pulley Supercharged Two Valve Motor Dyno Test
Muscle Mustangs & Fast Fords
Muscle Mustang & Fast Fords