Ford rolled out a completely new Mustang in 2005 with stellar looks, an outstanding engine package, and a new automatic transmission that impressed even diehard stick-shift guys. We instantly saw people throwing tunes in the ECU and adding nitrous, cold-air kits, exhaust systems, turbo kits, and supercharger systems.
The quest for more power pushed the aftermarket into overload, and now we’re left with a skewed sense of reality as 500 rwhp from stock engines is expected every time a wrench is spun. The 4.6L Mustang Three-Valve engine program lasted six years, and we can confidently point to the supercharger as being one of the most popular upgrades. Going mid-11s is as simple as a blower, custom tune, and sticky tires.
Level 10 disassembles the...
Level 10 disassembles the transmission, cleans the case, and paints it. The black tube is for the transmission overflow and Pat Barrett, head honcho at Level 10, suggests the vent tube is routed to an overflow tank that is remotely mounted. The vent can sometimes leak fluid into the bellhousing causing unnecessary concern that the front seal is leaking.
Anthony Giagnacovo can certainly attest to the simplicity of it all. His ’06 Mustang GT benefits from a Saleen twin-screw supercharger (10 psi), JDM Engineering tune, Kook’s headers/ X-style midpipe/axle-back exhaust, and 17-inch Mickey Thompson drag radials. The car was modified in 2008 with just 5,000 miles on the ticker.
Once the mods were done, Giagnacovo wasn’t shy about racing the car hard, as he attends three NMRA events a year, plus local Mustang events at Englishtown and Atco Raceway, countless test-and-tune sessions, as well as a lot of cruising at the Jersey Shoreyes, we said the Jersey Shore. Best time to date has been an 11.24 at 120 mph, and the car cranks out 469 rwhp through the automatic transmission that is relatively untouched. He added a hardened input shaft and trans cooler, otherwise, the transmission is the same as it rolled off the assembly line--including the torque converter.
All too often we proudly display performance gains on these pages, but rarely do we speak of long-term endurance of the parts. Unfortunately, it is just too hard to track the progress of each install, and every owner treats his or her equipment differently. For Giagnacovo, it took 25,000 miles and who-knows-how-many dragstrip runs, but the stock trans threw up the white flag and surrendered. The car wouldn’t move, so JDM Engineering yanked it out and sent the 5R55S to Level 10 Performance Transmission in Hamburg, New Jersey. He smoked Second, Third, Fourth, and Fifth gears, comments Pat Barrett of Level 10.
Here is an example of a toasted...
Here is an example of a toasted band that was removed from Giagnacovo’s 5R55S. It’s burnt and worn out. On the left is the new high-performance band that Level 10 will install during the rebuild.
The company isn’t a stranger to the pages of
MM&FF, as it was responsible for delivering a bulletproof 4R100 transmission for our former project vehicle, The Fridge, a low-10-second Gen 2 Lightning that was driven daily and whipped often. Barrett and his Level 10 shop did the same thing to Giagnacovo’s trans since more dragstrip abuse and street fun are on the agenda.
Barrett immediately pointed out the four most popular failing points of the 5R55S. The first is an issue with the input shaft--it will bend and snap under hard use, including some aftermarket ones. "The shaft can break two ways, locking the torque converter up at the wrong time, or from excessive wheelhop," states Barrett. "The input shaft was never designed to lock up under WOT, but you know racers--they love to get the mph out the car by locking it up. Our shaft is designed to withstand that abuse. The wheelhop will shake the shaft and snap."
The next issue on the list is a cold start valve failure. According to Barrett, there is a special circuit in the valvebody that restricts fluid flow to and from the trans cooler. This is done to bring the trans up to operating temperature quickly.
It was designed for extreme cold weather startups, like 20-30 below zero. In a perfect world this valve works perfectly, but we don’t live in a perfect world, adds Barrett. Level 10’s overhaul eliminates the valve to prevent any problems because 99 percent of these cars aren’t going to be fired up in that extreme weather.
The torque converter lock-up...
The torque converter lock-up function can be brutal on input shafts if locked too early, or if there is too much tire shake. Giagnacovo had an aftermarket shaft in the trans, and you can see the splines are starting to twist. Barrett said the new Level 10 shaft is made from a special material and is designed for severe duty.
One of the four major problem...
One of the four major problem areas in 5R55S transmissions, according to Barrett, is the incorrect line pressure for high-performance action. The shop manually adjusts the electronic solenoid to increase line pressure from 90 psi to 180 psi. The extra pressure prevents slippage and helps keeps the drum alive, which contains four gears and the band.
Level 10 adds a new relief...
Level 10 adds a new relief pump valve with a better plunger to prevent it from binding. The Level 10 valve is on the left and OEM on the right.
The cold-start valve is disassembled...
The cold-start valve is disassembled on the bench and modified to remain locked. The valve regulates transmission fluid flow from the valvebody to the trans-cooler in an attempt to bring it up to operating temperature in extreme cold weather. According to Barrett, he would rather have the fluid flowing all the time so you can pull into the burnout box with full fluid flow.
The servo bores were bad in...
The servo bores were bad in Giagnacovo’s transmission and Level 10’s James Lopez bored ’em and added inserts. According to Barrett, a bad servo bore will cause inconsistent line pressure, which leads to inconsistent tuning and durability.
Here is evidence of the servo...
Here is evidence of the servo bore distortion. The servo will apply pressure to just one side of the band, causing these witness marks. The band gets cocked sideways on the drum.
All OEM parts are inspected...
All OEM parts are inspected for wear and replaced if necessary.
The clutches are soaked in...
The clutches are soaked in transmission oil before being installed in the drum. This is done to ensure proper lubrication when the car is fired up with the new transmission in place.
For better holding power,...
For better holding power, the drum is stacked with high-performance clutches.
Lopez installed the front-pump...
Lopez installed the front-pump and added new seals and gaskets throughout the entire transmission.
Once the insides are installed,...
Once the insides are installed, Lopez put the Intermediate and Overdrive servos back in the case.
The valvebody is bolted down...
The valvebody is bolted down using 89 in/lb.