search musclemustangfastfords.com

Two Valve Stroker Motor Build Pressure Gauge

 
Two Valve Stroker Motor Build Pressure Gauge
Two Valve Stroker Motor Build Pressure Gauge
To ensure optimum nitrous flow and power, we installed a pressure gauge on the bottle. The bottle was placed in a nitrous heater (a heated water bath) until the bottle pressure exceeded 900 psi. Once armed and ready with 150hp jetting, we ran the two-valve one final time in anger and were rewarded with 604 hp and 588 lb-ft of torque. That is some serious power! View Related Article
Two Valve Stroker Motor Build Ford Mustang Two Valve Stroker Motor Build Zex Nitrous Two Valve Stroker Motor Build PI Motor Two Valve Stroker Motor Build Stroker Crank Two Valve Stroker Motor Build Short Block Assembly Two Valve Stroker Motor Build Twisted Wedge Track Heads Two Valve Stroker Motor Build Valve Layout
Two Valve Stroker Motor Build Valve Two Valve Stroker Motor Build Combustion Chamber Two Valve Stroker Motor Build Ports Two Valve Stroker Motor Build Billet Cam Towers Two Valve Stroker Motor Build Comp Cams Two Valve Stroker Motor Build Aluminum Valve Covers Two Valve Stroker Motor Build Track Heat Intake System
Two Valve Stroker Motor Build High Flow Intake Ports Two Valve Stroker Motor Build Intake Installed Two Valve Stroker Motor Build Cobra Throttle Body Two Valve Stroker Motor Build Fuel Line Two Valve Stroker Motor Build Long Tube Headers Two Valve Stroker Motor Build Motor Two Valve Stroker Motor Build Zex Wet Nitrous System
Two Valve Stroker Motor Build Single Fogger Nozzle Two Valve Stroker Motor Build Trick Controller Two Valve Stroker Motor Build Pressure Gauge
Muscle Mustangs & Fast Fords
Muscle Mustang & Fast Fords