Building 400hp Into A 5.0L Small-Block Engine - Down-Low 5.0

Down-Low 5.0L Pricing
Pro Comp heads	$540
Parker Funnel Web intake	$125
Complete 5.0L Fuelie, Pick-A-Part (wrecking yard)	$100
Core charge for motor	$20
Gaskets set, Pro Comp	$25
TFS Track Max cam	$159
Pro Comp roller-tip rockers	$55
Elgin hardened pushrods	$35
"Down-Low 5.0" Total Build Cost	$1,064

E7TE Iron Versus Pro Comp 210, As-Cast
Intake Airflow Data CFM @ 28 Inches
Lift	E7TE	Pro Comp 210
0.100	55	57
0.200	110	102
0.300	142	147
0.400	160	194
0.500	157	233
0.600	155	256
0.700	NA	262

E7TE Iron Vs Pro Comp 210, As-Cast
Exhaust Airflow Data CFM @ 28 Inches
Lift	E7TE	Pro Comp 210
0.100	40	55
0.200	75	91
0.300	101	131
0.400	110	160
0.500	112	170
0.600	111	174
0.700	NA	177

Pro Comp Electronics 605 S. Milliken Ave., Ste. A Ontario CA 91761 9-09/-605-1123 www.procompelectronics.com	Holley/Hooker 1801 Russellville Rd. Bowling Green KY 42101 2-70/-782-2900 www.holley.com
Trick Flow Specialties 1248 Southeast Ave. Tallmadge OH 44278 330-630-1555

Full Article

Prev | 1 | 2 | 3 | 4 | 5

Discuss in Forums | Email | Print

Community Comments

wardf (Today 04:44 PM)

I would like to know where you got the heads that cheap? Did you have to throw the MM&FF name out there? You need to list all the sources so that we as subscribers can try to accomplish this also. I can understand the horse trading for used items but how about listing real prices that we can go out and buy all the items for. I have a good used 5.0 already so I ought to be able to do this easily but when I price stuff out it doesn't seem like I'm going to make it.

Add a Comment (Must Be Registered)

*Please enter your username

*Please enter your password

*Please enter your comments

User Name		Not Registered? Signup Here
Password		Not Registered? Signup Here

Comment

(1024 character limit)

Related Photos

	GMS Turbocharged Stroker Engine - 585-RWHP Three-Valve Mod-Motor Throwdown Granatelli Motor Sports Adds Crate Engines To Its Lineup Of Go-Fast Parts.... more
	All-Aluminum 427 Street Stroker Testing Building And Testing An All-Aluminum 427 Street Stroker... more
	Installing A 331-Stroker Kit In A Small-Block - Stock-Block Stroke Swap Part 4 From The Engine Dyno To The Chassis Dyno, Our 331ci Small-Block Ford Is Put To The Test.... more
	Hellion Ford Mustang Build - The Strongest Link In The Chain - Tech Building A Bulletproof Bottom End Means Big Fun With Big Boost.... more

Building 400hp Into A 5.0L Small-Block Engine - Down-Low 5.0

Community Comments

Add a Comment (Must Be Registered)

Related Photos

Related Articles

More Related Content

Sponsored Links