1993 Mustang SVO Cobra Prep & Paint
|
Our front and rear bumper covers were straight but riddled with pockmarks, gouges, and pits from the plastic deteriorating. Getting new covers was out of the budget, so we sanded them down with 120-grit paper using the DA and various blocks. We then used the Rage body filler over a large portion of each cover, sanded it down with 80-grit, and then primed them. With the primer dry, we sanded them with 180 paper and touched up any missed spots with spot putty. We then reprimed and sanded again with 400-grit paper before applying paint. View Related Article
|
|