Fox Mustang Brake Upgrade - Give Your Fox A Brake!
|
Connect the brake lines from the PBR front caliper to the hard lines. Note: The fittings were not compatible between the stock Fox-body hard line and the SN-95 brake hose. We used an Edelman fitting (PN EDE-258430 1/4 x 3/16-inch) to adapt the brake hose to the brake line. We found that this was necessary on the passenger side only. The SN-95 driver side brake hose/fitting is a direct fit onto the Fox-body brake line fitting. Repeat installation for the driver side brakes, then reattach the steering linkage, tighten the castle nut, and install the cotter pin to the spindle. View Related Article
|
|