Fox Mustang Brake Upgrade - Give Your Fox A Brake!
|
After the brake pads and caliper bracket are bolted onto the spindle assembly and rotor, the PBR front caliper can be installed. Note: There's a possibility that Ford changes the spindle and/or caliper tools after a couple years. We had to remove about 1-2 mm of material for caliper clearance around the spindle in a small area. The spindles we are using are '04 GT spindles, and it's possible the calipers may be late '90s calipers. With parts conversions like this, always remember nothing usually just bolts right up. Be prepared and do your homework. View Related Article
|
|