Steeda's G-Trac Street Suspension - Proper Snake Handling
|
To start things off, remove the brake caliper with a 15mm socket and slide off the brake rotor. Next, undo the spindle nut with a 15/16-inch (24mm) wrench, but do not remove it. Using a large hammer, whack the spindle to free this joint, taking advantage of the spring pressure to help pull it apart. Once it is free, remove the ABS sensor with a 1/4-inch six-point socket, and remove the ABS sensor wire's bracket with a 24mm socket. Then, remove the two lower strut housing nuts with the same socket, but leave the bolts in place. View Related Article
|
|