B&G Custom Turbo Install - Turbo Boost On A Budget Upgrade
|
Since our stock mass airflow meter was both maxed out and non-compatible with the blow-through design of the system, we upgraded to this Granatelli Motorsports 90mm unit and called Race Part Solutions for some of their killer silicone couplings and T-bolt clamps. Make sure you leave a good amount of straight tubing before the meter so that it gets a good air signal. Air is rather turbulent before or after tight curves and doesn't provide a steady flow over the sensor element. Also consider how far your wiring harness for the meter extends forward. It's not the end of the world if you have to lengthen the harness, but we were able to position the meter in a good location that didn't require altering the harness. View Related Article
|
|