Ford GT Forced Induction Test - Breathing In Rare Air
|
After removing the stock blower, on went the Kenne Bell 2.8L H. Once installed with the Kenne Bell 2.8L blower and matching 2.75-inch blower pulley, the peak power numbers jumped to 825 hp and 695 lb-ft of torque (at just over 22 psi). After the installation of some prototype cams from Accufab, the power numbers jump to 875 hp at less than 20 psi, but we were sworn to secrecy on that test until the final profiles have been tested. View Related Article
|
|