Bullitt Mustang Modifications - Bullitt Reloaded Part 2
|
As is typical on Paxton and Vortech blowers-or any others that do not employ self-contained lubricant-a rubber return line plumbs into the oil pan via a fitting, and the braided pressure feed line takes its supply from a T-junction installed at the oil-pressure sending unit outlet on the underside of the oil filter housing (fitting is barely visible at top right). The kit supplies a punch to put a hole in the front of the oil pan or, as MRT did, you can lift the engine and remove the pan to create and thread the hole for the supplied brass fitting. View Related Article
|
|