Mustang Forced Induction Install - Feeling the Pressure
|
After the crossover pipe is installed and the dump tube is hooked up, a maze of tubes brings the spent gases around some suspension components and finally out to the factory exhaust pipes. It may look confusing, but it all fits quite nicely. We encountered two prob-lems with the exhaust tubing, attributable to the Saleen-added hardware. The pipe had to be moved away from the SFI balancer, and to do that Sorby kinked it slightly. The other problem was interference with the oversized sway bar. Hellion relocates the sway bar, but a bigger bracket was required to drop the thicker-than-stock sway bar down a little more to clear the exhaust. View Related Article
|
|