Snow Performance Ford Mustang Turbo Kit - Amped On Meth - Tech

The kit came with the necessary Y-pipe to connect the downpipe from the turbo to the factory (or aftermarket) after-cat exhaust.

NA VS. Stage 1 Snow Performance
The Amazing thing about this curve is not the fact that the turbo motor exceeded 400 lb/ft of torque (a gain of 116 lb/ft) or that the peak power was up by a like amount; it's that this occurred with just 5 psi of boost and at just 15 degrees of timing. A more aggressive tune would easily unleash considerably more power, but we wanted to demonstrate the merits of the system in an ultra-safe street tune. Imagine-a gain of over 100 hp and 100 lb/ft of torque at just 5 psi of boost. We can't wait to crank up the boost on this kit and show some crazy power numbers. Concerned about boost response on a turbo kit? Check out the fact that this kit improved the torque production by a solid 80 lb/ft at just 2,700 rpm.

The stock MAF and filter housing were ditched in favor of a 3.5-inch section of tubing designed to accept the factory MAF electronics.

Check out the spray pattern on the Snow methanol/water injection. The cooling properties offered by the injection system help minimize the chance of detonation. After tuning, the turbo motor produced 390 hp and 407 lb-ft of torque at just 5 psi and 15 degrees of timing.

The Snow Performance injection was fed to the motor through a nozzle located in the inlet tubing directly in front of the throttle body.