Muscle Mustang & Fast Fords Homepage Muscle Mustangs & Fast Fords
Facebook Click here to find out more!

RHS Head Install Head Torquing Down

 
RHS Head Install Head Torquing Down
1990 Ford Mustang Head Swap - Back In Business
Phil Watson of JPC Racing torques down the heads. The top torque sequence is: 25 ft-lb, 45 ft-lb, and finally 70 ft-lb. The bottom torque sequence is 25 ft-lb, 45 ft-lb, and then 65 ft-lb. These numbers are done because the head is aluminum. Be sure to start with the middle bolts and work your way out. Start with 25 ft-lb and work your way around the head. Then go to 45 ft-lb and then the final torque-down sequence. This will apply even pressure as it gets tighter and tighter. View Related Article
RHS Head Install 1990 Ford Mustang Burnout RHS Head Install Head Torquing Down RHS Head Install Dyno Graph RHS Head Install RHS Heads RHS Head Install 1990 Ford Mustang Engine Bay RHS Head Install Upper Intake Manifold Removal RHS Head Install Rocker Arms
RHS Head Install Lower Intake Manifold Removal RHS Head Install Serpentine Belt Removal RHS Head Install Stud Install RHS Head Install Old Head Removal RHS Head Install Bare Block RHS Head Install Threaded Insert RHS Head Install Head Cleaning
RHS Head Install Gasket Placement RHS Head Install Head Placement RHS Head Install Top Stud RHS Head Install Bottom Stud RHS Head Install Reducer RHS Head Install Thread Lubrication RHS Head Install Rocker Arm
RHS Head Install Pushrods RHS Head Install Rocker Arm Oiling RHS Head Install Rocker Arm Install RHS Head Install Intake Gasket Trimming RHS Head Install Intake Placement RHS Head Install Intake Port Check RHS Head Install Valve Cover Install
RHS Head Install Coolant Temperature Sensor Placement RHS Head Install Upper Intake Manifold Install RHS Head Install Sparkplugs RHS Head Install Sparplug Wire Attachment RHS Head Install Complete Install
SEMA Show Live
PRI Trade Show
Get Adobe Flash player
Muscle Mustang & Fast Fords