Nitrous! It packs a punch, delivers incredible performance gains, and can dramatically drop your dragstrip times. Aside from its over-glamorized use in Hollywood films, offering mythical power at the press of a button, it's a simple design that works.
When injecting nitrous into your engine, you're essentially adding more oxygen into the combustion chamber. Due to the added oxygen, more fuel is needed in order to maintain a proper air-to-fuel ratio. With the increased air and fuel, the combustion process is enhanced and an increase of power is the result.
There are two types of nitrous applications—dry and wet. In a dry system, only nitrous flows into the intake tract; the extra fuel is added by increasing fuel pressure or adjusting how long the fuel injectors stay open (increasing the pulse width). In a wet kit, both nitrous and fuel are delivered together, typically through a plate or nozzle system.
The Reaper H/K kit comes complete with a NX 2½-pound bottle, NX solenoid, stainless steel
When we got wind of Blow-By Racing's new Reaper Nitrous H/K (hidden kit) dry system, we were intrigued. Designed to be totally hidden for '10-present Mustangs, BBR's dry-nitrous kit offers versatility for just about anyone. Included in the kit (PN Reaper-HK-25) is a NX 21⁄2-pound bottle, NX solenoid, stainless steel fittings, a nylon nitrous line, wide-open throttle (WOT) switch, and momentary pushbutton and activation switch. Whether you're the casual street hooligan or a track racer in need of a pick-me-up, this kit offers an increase up to 125 hp at a reasonable cost—$395.95.
"We wanted to design a kit that was totally hidden and something that hasn't been done before," says Chris Jones, owner of Blow-By Racing. "For '11-and-up cars, the sound tube gave us a perfect hiding spot for the nitrous line. We teamed up with Nitrous Express to build the kit, as we believe it offers the best quality in parts and customer service.
"Our kit was originally designed to handle between 50 to 125 horsepower out of the box, but with a solenoid and bottle upgrade, it can easily support over 250. Our kit is simple, easy to install, and offers a cost-effective way for anyone looking to improve performance."
We headed to Boca Raton, Florida, where BBR installed its kit onto a bolt-on automatic '13 Mustang GT. Our test mule featured a stock 3.15 gear ratio, JLT CAI, BBR off-road X-style mid-pipe, a tune, and Nitto NT05R 285/40R18 drag radials. It had run a best of 12.50 at 114 mph. On the dyno, it cranked out 388 rwhp and 336 lb-ft of torque. With nitrous, it laid down 485 rwhp and 488 lb-ft. That's an increase of 97 rwhp and 152 lb-ft of torque.
Installation of the Reaper kit took less than two hours; we then headed to Palm Beach International Raceway for testing. We ran several times throughout the night, with a best of 10.83 at 126.53 mph. That's a drop of 1.67 seconds in the quarter. We bet that would surprise your friends, especially considering no one will know you're spraying the juice.