Muscle Mustang & Fast Fords Homepage Muscle Mustangs & Fast Fords

0306MM ToHotpt228 Z

With the crank torqued down and spinning freely, we tapped the crankshaft key way into the crank (not shown) and slipped the lower timing chain gear over the snout. Next, we cleaned the cam, then coated it with assembly lube and slipped it back into place. Since new bearings were installed we spun the cam by hand to make sure it turned easily and smoothly.
Too Hot To Trot: PT 2

 With the crank torqued down and spinning freely, we tapped the crankshaft key way into the crank (not shown) and slipped the lower timing chain gear over the snout. Next, we cleaned the cam, then coated it with assembly lube and slipped it back into place. Since new bearings were installed we spun the cam by hand to make sure it turned easily and smoothly.  View Related Article

 

Get Adobe Flash player

Car Research Guide