|
|
 We opted for the 2-1/2-inch...  We opted for the 2-1/2-inch polished tip for a stock look. However, you can opt for the kit with polished slip-on, 3-inch tips for $419.99 (PN PYP-SFM16V).  First, we unbolted the after-cat...  First, we unbolted the after-cat from the midpipe.  We then removed the H-pipe...  We then removed the H-pipe from the flange on the headers.  We then unbolted the headers...  We then unbolted the headers from the cylinder heads...  ... and removed them from...  ... and removed them from the top.  The Pypes headers come with...  The Pypes headers come with new header bolts and gaskets.  Then, we installed our O2...  Then, we installed our O2 sensors.  Since the downpipes are separate,...  Since the downpipes are separate, installation is much easier.  After the hardware is in place...  After the hardware is in place on both downpipes, we installed the X-style crossover (clamps included in kit).  We supported the X-style crossover...  We supported the X-style crossover with a pole jack, and installed the lead pipes and mufflers...  ... then we removed the rear...  ... then we removed the rear wheels...  and installed the tailpipes...  and installed the tailpipes using the stock hangers.  Once everything is lined up,...  Once everything is lined up, you can tighten all the bolts and clamps.  Don't forget to reattach the...  Don't forget to reattach the O2 sensors to the harness.
|