search musclemustangfastfords.com

Inspect The Lines

 
 
Inspect The Lines
Inspect The Lines
While Spector was running the lines, Lacko had to fabricate a bracket to mount the nitrous, fuel, and purge solenoids on. The solenoids in the kit were different from previous solenoids he worked with, as the outlets on the solenoids came out from the bottom, where the older-style came out from the side. Lacko had to rework the bracket to make the solenoids fit. Once he got everything marked, he cut the bracket from aluminum, wiped it down, bent it how it needed to be bent, and painted it black. View Related Article
Lightning Back Cab Dashboard Drilling Pick A Place Measure Place It
Nitrous Kit Pressure Gauge Place It In Bottle It Inspect The Lines Template Connect
Arm Switch Install Throttle Switch Remove Cold Airintake Replace Stero Frame Wiring Switch Drill A Hole
Place For Nozzle Position Hook Them Guages Ready Bottle Cooler Drain Fuel
Refill Tank Cool The Engine Air Fuel Monitored Dyno Research Final Result Done Rolling Out
Muscle Mustangs & Fast Fords
Muscle Mustang & Fast Fords