Once we picked the spot where we wanted the bottle to be located, we mocked up all that we could to get a general idea where we needed to drill holes, run lines, and install items. We got under the truck and double-checked our point of installation, making sure it would be easy to access the bottle bracket bolts from underneath. We also eyed up how we would be running the nitrous feed lines and bottle heater wires from the bed to the front of the truck. Once we had everything mocked up, it was time to get cracking. The first thing we did was take out the nitrous bottle and wrap it with the bottle brackets so we could mark off where the bottle would go in the bed.