Muscle Mustangs & Fast FordsProject Vehicles
1998 Ford Mustang Cobra Budget Rearend Rebuild - Blow-By Racing
We rebuild our '98 Cobra's 8.8 with help from Blow-by Racing.
If you've been following the build of our 1998 Cobra, you have an idea of what we've been trying to accomplish. It's been driven all across the state of Florida, ringing in over 26,000 miles this past year, and is used everyday. Our Snake has visited the likes of Bradenton Motorsports Park for some quarter-mile action, and graced the asphalt of Sebring International Raceway's famous road-course. To sum it up, we've been building a Stang that's capable of handling just about anything.
This past November, after returning from Palm Beach International Raceway and its road course for some suspension tuning ("Snake Handler," Feb. '14), we noticed a wretched whining sound coming from the almost-stock 8.8-inch rearend. Our Cobra featured 4.30 gears, installed prior to purchasing, and the odometer had just rolled over 100,000 miles.
After removing the differential cover, it was clear what was wrong. Several carrier shims had backed out and were damaged, leaving the differential vulnerable to exploding. With our Cobra disabled, we decided to trailer it to Blow-by Racing (BBR) for an overhaul.
We decided to stick with a Traction-Lok–style differential. We needed something stronger than stock that could handle high-rpm launches and aggressive cornering, while also offering smooth driveability. BBR owner Chris Jones suggested a full 8.8 rebuild, starting with a 31-spline Yukon Dura Grip differential (PN YDGF-88-31-1; $449.95).
"The Yukon Dura Grip is a differential strong enough for track use, yet drives like stock around town," Jones explained. "It features a nodular case with composite clutches. Each unit is also completely rebuildable and comes with a one-year warranty."
From '79-'04, Ford equipped Mustangs with 28-spline axles, excluding the '03-'04 Cobras. Since our Cobra visits the 1,320 several times a year, as well as the road course, we wanted something stronger than stock. BBR set us up with a pair of Moser Engineering 31-spline axles (PN A883153; $275). Each axle is made from forged steel and is non-tapered, featuring hardened and ground bearing seats, and machined C-clip grooves. Replacement C-clip axles are available in lengths up to 37 inches. If you plan to narrow your rearend in the future, these forged axles can also be shortened and re-splined.
With our Ford Racing Performance Parts 8.8 installation kit (PN M-4210-C3) in hand, BBR Technician Rob Vargo got to work. Now, follow along as we show you how to beef up your 8.8-inch rearend and make it track ready.