Muscle Mustangs & Fast FordsHow To Engine
Livernois Motorsports Heads and Cams On A Stock Modular Engine - Top Shelf Shuffle
Making 451 Hp With Livernois Motorsports CNC-Ported Heads And Cams.
The Comp Cams Stage 4 cams that were installed on the engine featured here are pretty aggressive. The cam, however, is completely street worthy. Just don't expect to claim it to be stock when you are at the street races, it is quite noticeable. The head and cam package will enable a Three-Valve engine to rev to 6,500 or so rpm, in naturally aspirated trim. Thanks to the Livernois valvesprings, achieving that type of rpm range was really easy.
Like the cylinder heads, installed camshafts with the engine out of a car made the process so much easier. In no time, the camshafts were swapped and the engine was purring on the dyno. The extra air let into the cylinders was worth a whopping 31 hp. That brought total output to a rather impressive 451 at 6,500 rpm. Torque output rose as well with a peak of 401 at 5,500 rpm.
Cranking out 451 naturally aspirated horsepower at the crank is good for something in the low 12s. Those types of times would require 4.10 or 4.30 gears, super sticky rear tires, skinnies, and the usual assortment of suspension upgrades. Naturally, the driver will have to run through the gears very aggressively. Swapping to the ported heads and larger cams is something that can be accomplished with your engine still in the car. Schropp gave props to the Three-Valve engines and said they respond very well to boost. He did caution that it is easy to push the engine beyond its safe limits when power adders come into play. It just so happens that Livernois has short-blocks to go along with its induction pieces as well. Horsepower sure does come easy these days.