'06 Saleen S7 Twin Turbo Specifications
GENERAL
|
| Curb weight | 2,750 lbs (1,250 kg) |
| Weight Distrib., F/R | 40% / 60% |
| Fuel Capacity | 19.0 U.S. gal (72 liters) |
| Wheelbase | 106.30 in (2,700 mm) |
| Track, F/R | 68.82 in (1 748 mm) / |
| | 67.32 in (1,710 mm) |
| Width | 78.35 in (1,990 mm) |
| Front Overhang | 40.59 in (1,031 mm) |
| Rear Overhang | 41.14 in (1,045 mm) |
| Length | 187.95 in (4,774 mm) |
| Height | 40.98 in (1,041 mm) |
| Ground Clearance | 4.00 in (102 mm) |
| Trunk Space, F/R | 2.65 cu ft (76 liters) / |
| | 2.82 cu ft (79 liters) |
Chassis
4130 lightweight steel space frame with honeycomb composite panels
| ENGINE |
| Type | All-aluminum V-8, Two-Valve, cam-in-block |
| Displacement | 7.0 liters |
| Bore and Stroke | 4.120 x 4.00 in |
| | (104.6 x 101.6 mm) |
| Compression Ratio | 11.0:1 |
| Pistons | Forged aluminum |
| Connecting Rods | 4340 forged billet steel |
| Crankshaft | 4340 forged billet steel |
| Induction System | Air enters a roof intake, |
passes through a 90mm |
mass air meter, feeding a |
carbon-fiber plenum; from the plenum, air is |
routed to two twin-ball-bearing turbos, passes |
through an oval bore-throttle body into an aluminum |
intake manifold with eight individual runners |
| Cylinder Heads | CNC machined, all-aluminum, |
| | Saleen high-flow |
| Valves | Stainless steel with titanium retainers; |
Intake: 2.125 in (54.0 mm); Exhaust: 1.625 in |
| | (41.3 mm); beryllium exhaust seats |
| Valvetrain | Solid lifter/roller rocker |
| Exhaust System | Stainless steel high-flow |
with merge collector incorporating dual |
catalysts per cylinderbank and EGR system; two |
| twin-ballbearing turbos with 44mm wastegates |
| Required Fuel | 91 octane |
| Alternator | 140 amps |
| Battery | 12 volts |
| Front Engine Accessory Drive | |
| (FEAD) | Compact drive system with |
| | side-mounted water pump |
| Emission Control System | OBD-II–compliant; |
| dual, heated oxygen sensors per bank; high-volume |
| | EVAP system |
Fuel System | High-capacity returnless |
| | with 43-lb/hr injectors |
Oil System | High-vacuum dry sump |
configuration; Capacity:12.6 qt (12.0 liters); |
| | aluminum oil tank |
Horsepower | 750 bhp at 6,300 rpm |
Torque | 700 lb-ft at 4,800 rpm |
Redline | 6,500 rpm |