Muscle Mustangs & Fast FordsFeatured Vehicles
1990 Mustang GT RealSpeed - Research And Destroy
Dan Carlson Uses His 240,000-Mile '90 Mustang GT For Research And Development, And Destroys The Competition With His Daily Driver.
When you own and operate a performance shop, testing products and combinations to achieve real-world results gives you a higher level of credibility with your customers and an edge over your competition. Dan Carlson, of Bohemia, New York, knows the importance of this firsthand. Dan is the proud owner of Realspeed Automotive, and has been using his '90 Mustang GT as a research and development tool for almost 20 years. And amazingly, even with over 240,000 miles on the odometer, he still uses this GT every day.
Dan bought the GT new in 1990 with a very specific goal in mind. He wanted to prove that it was possible to consistently run 11-second quarter-mile times, yet still have the drivability to take cross-country road trips. Today, with the vast offerings of the Mustang aftermarket, an 11-second daily driver is an almost common occurrence, yet in the early '90s, it was nearly unheard of. When Dan started out, his combination was simple but effective, and countless trips from Florida to New Hampshire while Dan was in college, proved it was absolutely possible to reliably go fast.
Throughout most of the '90s, Dan worked as an engineer for Steeda Autosports in Florida, and he used his Mustang as a research and development mule. But after nearly a decade at Steeda, Dan moved north and opened his own shop. In 2004 he started Realspeed Automotive, which is on Long Island. It is no surprise his '90 GT still handles the R&D duties as well as the labors of daily driving.
Over time, the Mustang has racked up nearly a quarter-million miles, many while using the original Vortech blower case. Dan's combination may have changed, but his overall go-fast goal is the same-and as the aftermarket has evolved, so has his GT. In the search to build a faster, more reliable daily driver, Dan has put together another simple, yet effective, combination.
The mega-mile Mustang has seen a few combos over time but this time around he started with a FRPP Sportsman 302 block and bumped the displacement to 327ci. A billet crankshaft spins a set of Eagle rods and Diamond pistons with a compression ratio of 9.3:1. A Vortech V1 SC Si-Trim supercharger force-feeds 16 pounds of boost into an Edelbrock Performer RPM intake. A custom-ground hydraulic-roller cam opens and closes the valves inside a set of Edelbrock Performer 5.0 aluminum cylinder heads where the air/fuel mixture is compressed. Exhaust gases escape through a set of JBA shorty headers into a MagnaFlow cross-pipe and out through Dynomax mufflers.
Power is transferred through a Spec stage-3 clutch to a Tremec 3550 five-speed transmission that flawlessly handles the gear changes despite over 100,000 miles of daily use. The gearbox spins an FRPP aluminum driveshaft, which uses a set of 3.55 gears to turn the 31-spline Moser axles hidden inside the stock 8.8-inch rearend housing. Up front, Steeda Ultralite drag springs and Tokico drag struts handle the weight transfer on hard launches, and a Steeda 5-link rear suspension does a stellar job of keeping the Mickey Thompson ET Street Radials securely planted to the pavement. Steeda Pentar wheels sit in all four corners and Nitto NT01 rubber wraps the fronts.